Plant Variegation: What It Is, Types, Colours and Why It Fades

    Philodendron Pink Princess on a windowsill with dark burgundy-green leaves, pink speckles and one mostly pink leaf (AI-generated image)

    Variegation is any pattern of different colours on a leaf that would normally be one even shade of green. It is why a Philodendron Pink Princess has splashes of bubblegum pink, why a snake plant 'Laurentii' has golden edges, and why a Monstera Albo can sell for many times the price of its all-green parent. This guide explains what variegation is, how plants get it, the colours it comes in, how growers breed and keep it, and what makes it fade. Numbers in square brackets link to the references at the end.

    Variegation in brief

    • Variegation is uneven colour on a leaf. It happens when some cells lack chlorophyll, carry extra pigments, or are built differently, for example with air pockets that reflect light [1].
    • The most collectable houseplant variegation (Pink Princess, Monstera Albo, snake plant 'Laurentii') is chimeral: the plant is a mix of genetically different cell layers. It is passed on through cuttings and division, not reliably by seed [2].
    • Good care cannot create variegation, but light, pruning and plant health decide whether the variegation a plant already has is kept, increased or lost.
    • Variegation fades mainly through reversion (green shoots outgrowing variegated ones), low light and stressed plants [3][4].

    What is variegation?

    A normal leaf is green because its cells are packed with chloroplasts, the tiny structures that hold chlorophyll and turn light into sugar. In a variegated leaf, some zones look different. A 2020 review in the journal Flora sorted variegated leaves into five types according to which part of the leaf causes the pattern: chlorophyll, pigment, epidermis (the leaf's outer skin), air space and appendages such as hairs [1]. For houseplant growers these fall into two broad groups.

    • Pigment-based variegation. Some cells have less chlorophyll or none at all (white, cream, yellow and mint areas), or carry extra pigments such as red-purple anthocyanins (pink, red and burgundy areas).
    • Structural variegation. The cells still contain chlorophyll, but the leaf is built differently. Air spaces just under the surface scatter light and look silver. University of Florida researchers found air spaces in the silver zones of Aglaonema nitidum leaves that were absent from the green areas [5].

    Tissue without chlorophyll cannot make food, so the green parts of a leaf feed the white or pink parts. That trade-off sits behind almost every piece of variegation care advice in this guide.

    How do plants get variegation?

    1. Chimeras: mixed cell layers

    Each growing tip (meristem) is built from distinct layers of cells, usually called L1, L2 and L3, and each layer forms different parts of the leaf. If a mutation that stops chlorophyll forming happens in one layer, every leaf made by that tip is a mix of normal and mutant cells. A plant made of genetically different tissues like this is called a chimera [2].

    • Periclinal chimeras have a whole layer mutated. The result is a stable, repeatable pattern, such as the yellow margins on snake plant 'Laurentii'.
    • Mericlinal and sectoral chimeras have only part of a layer mutated. The result is unpredictable splashes, half-moon leaves, and the occasional all-white, all-pink or all-green leaf. Monstera Albo and Philodendron Pink Princess behave this way.

    The mutation is often in the chloroplast's own DNA rather than the main (nuclear) DNA. A 2022 study in Horticulture Research sequenced the chloroplast DNA of green and white tissue from 23 chimeral ornamental plants. In 14 of them the two tissues carried different chloroplast DNA, traced to single-letter mutations in eight chloroplast genes [6].

    2. Pattern genes: built-in variegation

    Some plants are patterned because of their ordinary nuclear genes. The silver markings on many Aglaonema and the painted bands on Calathea are examples. Every cell has the same genes and the pattern is part of the plant's normal development, so it is passed on by seed and breeders can cross for it. Research on variegated mutants of the model plant Arabidopsis shows how a single nuclear gene involved in building chloroplasts can produce green-and-white leaves [7].

    3. Chloroplast mutations passed through the seed parent

    Chloroplasts carry their own DNA, and in most flowering plants they reach the seed only through the mother (seed parent). In 1909 Carl Correns showed that variegation in the four o'clock flower (Mirabilis jalapa) was inherited only through the seed parent, while Erwin Baur found that in Pelargonium it came through both parents and proposed that the chloroplasts themselves carried the trait. Later work proved Baur right [8].

    4. Viruses

    Some patterns are caused by infection. The striped 'broken' tulips that sold for fortunes during the Dutch tulip mania of the 1600s were infected with tulip breaking virus, which is spread by aphids [9]. In houseplants, mosaic viruses cause irregular yellow mottling, often with distorted or stunted leaves. That is a disease, not variegation worth keeping: isolate the plant, do not propagate from it, and ask your local nursery or agriculture department if you are unsure.

    5. Reflective and surface variegation

    Structural patterns come from the leaf's build rather than its pigments. The aluminium plant (Pilea cadierei) has raised silver patches, Scindapsus pictus 'Argyraeus' has silver spots, and some Begonias get a shimmer from coloured hairs. Because these patterns are built into every leaf, they are usually very stable.

    The colours of variegation

    Variegated houseplants on a timber shelf showing white, cream, yellow and silver variegation (AI-generated image)
    White, cream, yellow and silver variegation side by side. For pink, see the Pink Princess at the top of this guide. (AI-generated image)
    Colour What causes it Examples
    White No chlorophyll in those cells Monstera Albo Borsigiana, Philodendron White Knight, pothos 'Marble Queen'
    Cream Very little chlorophyll, with some yellow carotenoid pigments remaining Monstera Thai Constellation, Philodendron Florida Beauty
    Yellow / gold Chlorophyll reduced, so the yellow carotenoids show through Snake plant 'Laurentii', Monstera standleyana Aurea, golden pothos
    Mint / pale green Reduced chlorophyll in one cell layer over normal green tissue Philodendron Paraiso Verde, Monstera 'Mint'
    Pink / red Red-purple anthocyanin pigments showing where there is no green to hide them Philodendron Pink Princess, Philodendron Strawberry Shake, Hoya carnosa 'Krimson Queen'
    Orange A mix of carotenoids and anthocyanins in low-chlorophyll tissue Philodendron Ring of Fire
    Silver Air spaces or reflective cells under the leaf surface Aluminium plant, Scindapsus pictus 'Argyraeus', many Aglaonema
    Purple / burgundy Anthocyanins layered over green tissue Tradescantia zebrina, the new leaves and stems of many philodendrons

    Philodendron Pink Princess: a worked example

    Philodendron erubescens 'Pink Princess' is the best-known pink variegated houseplant. The species name erubescens means 'blushing', and the plant naturally makes red-purple anthocyanin pigments in its stems and new growth. In the variegated sectors the cells lack chlorophyll, so instead of green you see that pink. The variegation is chimeral, which explains its quirks.

    • No two leaves match. You get speckles, splashes, half-moons and the occasional fully pink leaf.
    • All-pink leaves are a warning sign, not a prize. With no green they cannot feed themselves. They tend to brown and die early, and a stem that only makes pink leaves will eventually starve.
    • Stems can revert. If the mutant cells are lost from the growing tip, that stem produces only dark green leaves.
    • Pink tissue is delicate. Growers commonly see browning on pink areas in harsh direct sun, dry air or with irregular watering.
    • It will not come true from seed. Seed is formed from a single cell layer, so seedlings do not inherit the layered chimera [2]. Nurseries multiply Pink Princess by cuttings and tissue culture, and tissue-cultured plants vary a lot in how much pink they show.

    Buying tip: choose a plant with roughly balanced pink and dark green across several leaves, including the newest one. Be wary of plants that are evenly pink on every leaf and sold under names such as 'Pink Congo'. Hobbyists widely report that these turn plain green within months, which suggests a temporary treatment rather than true variegation.

    For more detail, read how to make your Pink Princess more pink, how to make it more variegated and why Pink Princess is so expensive.

    Species with cultivars showing different types of variegation

    Many popular houseplant species have several cultivars, each carrying a different kind of variegation. Comparing them is the easiest way to see the types side by side.

    Species Cultivar Variegation
    Philodendron erubescens Pink Princess Pink chimeral speckles, splashes and half-moons
    White Princess, White Knight White chimeral splashes (White Knight has burgundy stems)
    Strawberry Shake Pink and cream sectors
    Monstera deliciosa Albo Borsigiana White sectoral chimera, unstable, half-moon leaves
    Thai Constellation Cream speckles from a tissue-culture line, generally regarded as more stable than Albo
    Aurea Yellow sectoral variegation (care tips)
    Mint Pale mint-green sectors
    Dracaena (Sansevieria) trifasciata Laurentii Yellow margins from a periclinal chimera
    Bantel's Sensation White vertical stripes
    Golden Hahnii Yellow-banded dwarf rosette
    Epipremnum aureum (pothos) Golden Yellow streaks
    Marble Queen Heavy cream marbling
    Manjula, N'Joy Distinct white and cream patches
    Hoya carnosa Krimson Queen Cream-to-pink leaf margins
    Krimson Princess Cream-to-pink leaf centres
    Monstera adansonii Variegated forms White or yellow sectoral chimeras (care tips)
    Philodendron 'Burle Marx' Variegated Cream-white sectoral variegation (how to get more)

    See our guide to snake plant types for photos of the variegated snake plants.

    How to improve and keep variegation

    Close-up of snake plant Laurentii leaves with banded green centres and yellow edges (AI-generated image)
    Snake plant 'Laurentii': the yellow edge is a separate tissue layer (a periclinal chimera), so divide this plant rather than taking leaf cuttings. (AI-generated image)

    Breeding, propagation and selection

    • Chimeral variegation is copied, not bred. Propagate by cuttings, division or tissue culture. When taking a cutting, choose a node where the leaf and the stem show good variegation, since the bud at that node grows from the same mixed tissue.
    • Divide snake plant 'Laurentii'; do not use leaf cuttings. The yellow margin is a separate layer of tissue. A US plant patent for a related cultivar describes Laurentii's yellow margins as tetraploid tissue surrounding a normal green core [11]. Leaf cuttings root from the green tissue and usually come up without the yellow edge. Our snake plant propagation guide covers both methods.
    • Pattern-gene and chloroplast variegation can be bred from seed. Nuclear patterns, as in many Aglaonema and Calathea, follow normal inheritance. Chloroplast variegation usually passes through the seed parent [8]. Breeders cross plants and select the best seedlings over several generations.
    • Tissue culture and mutation breeding are lab tools. Commercial labs multiply plants in sterile culture and select stable new mutants, which is how lines such as Thai Constellation reach the market. They are not practical at home.

    Growing conditions

    • Give bright, indirect light. Variegated leaves have less chlorophyll, so they need more light than green forms to grow at the same speed. In dim spots the green tissue and any green shoots have the advantage. Light cannot add variegation to a chimera, but it keeps variegated stems strong enough to compete.
    • Use light to deepen pinks and reds. Plants make more anthocyanin in brighter light, which is thought to help protect leaves from light stress [10]. Pink Princess and Hoya 'Krimson Queen' often blush more in a brighter position. Avoid hot afternoon sun, especially in an Australian summer, because white and pink tissue scorches easily.
    • Feed moderately. Use a balanced, diluted fertiliser in the growing season. Very heavy nitrogen feeding is often blamed for lush green growth that outpaces variegated growth.
    • Keep roots healthy. Use a chunky, free-draining aroid mix and water when the top few centimetres are dry. Root rot and pests such as fungus gnats weaken a plant, and variegated growth suffers first.
    • Prune with purpose. Cut a reverted or poorly variegated stem back to a node with balanced variegation and let the bud there take over.

    What makes variegation fade?

    Pothos with cream-marbled leaves on one side and plain green reverted leaves on the other, with pruning snips beside the pot (AI-generated image)
    Reversion: the plain green growth on the right should be cut back to a node with variegated leaves. (AI-generated image)
    • Reversion. A shoot loses the mutant cell layer at its tip and starts producing plain green leaves. Green shoots make more food, grow faster and can take over the plant. The Royal Horticultural Society advises removing reverted shoots as soon as you see them, cutting back into variegated growth [3][4].
    • Too much variegation. The opposite problem happens too. Stems that make mostly white or pink leaves cannot feed themselves and weaken over time. Cut back to a node with a healthy mix of colour and green.
    • Low light. Where variegation is lost for good, inadequate light is often the cause [4]. Variegated stems grow slowly in poor light and lose the race against green growth.
    • Leaf age. Some variegation changes as leaves mature. Philodendron Ring of Fire shifts colour as its leaves age, and some cream or yellow zones green up over time. The same patent notes that the yellow inner tissue of the snake plant 'Vandal Gold' turns green with age [11].
    • Stress. Root rot, waterlogged soil [4], pests, cold draughts and irregular watering all slow a plant down, and slow-growing variegated stems are the first to struggle.
    • Colour that was never genetic. Virus mottling and chemically induced colour will not hold, however well the plant is grown.

    Variegation FAQs

    Can I make a green plant variegated?

    Not reliably at home. Variegation comes from the plant's genes or a mutation. Light and fertiliser will not turn an all-green Pink Princess pink, although plants occasionally throw a variegated shoot (a 'sport') on their own.

    Will a reverted stem become variegated again?

    Usually not. Once the tip has lost the mutant cells, that stem tends to stay green. Look further down for a node that still shows variegation and cut back to it.

    Does more light mean more variegation?

    For chimeras such as Monstera Albo, no. Light keeps the plant strong but does not change its genetics. For pink and red tones based on anthocyanin, brighter indirect light can make the colour more intense.

    Is variegation bad for the plant?

    Variegated plants have less green tissue, so they usually grow more slowly and need brighter light than their green relatives. They are perfectly healthy as long as each leaf keeps a fair share of green.

    Why are variegated plants so expensive?

    Chimeral variegation cannot be grown from seed, grows slowly and is unpredictable, so supply is limited. Read why variegated Monstera and Pink Princess command a premium.

    Shop variegated plants

    Browse our rare and unusual plants, the Philodendron Pink Princess and the variegated snake plant 'Laurentii', or see our full range of snake plants and indoor plants. We ship Australia-wide and offer Perth pickup.

    References

    1. Zhang, J.-H., Zeng, J.-C., Wang, X.-M., Chen, S.-F., Albach, D.C. & Li, H.-Q. (2020). A revised classification of leaf variegation types. Flora, 272, 151703. doi.org/10.1016/j.flora.2020.151703
    2. Marcotrigiano, M. (1997). Chimeras and variegation: patterns of deceit. HortScience, 32(5), 773–784. doi.org/10.21273/HORTSCI.32.5.773
    3. Royal Horticultural Society. Reversion. rhs.org.uk/problems/reversion
    4. University of Washington Botanic Gardens, Elisabeth C. Miller Library. Reversion in variegated vinca (Plant Answer Line). depts.washington.edu/hortlib
    5. Fooshee, W.C. & Henny, R.J. (1990). Chlorophyll levels and anatomy of variegated and nonvariegated areas of Aglaonema nitidum leaves. Proceedings of the Florida State Horticultural Society, 103. journals.flvc.org/fshs/article/view/93567
    6. Park, H.-S. et al. (2022), Horticulture Research, as summarised in: Unlocking the secrets of chimerism: plastid genes and the quest for variegation in the ornamental plant market. Phys.org, November 2023. phys.org
    7. Aluru, M.R., Yu, F., Fu, A. & Rodermel, S. (2006). Arabidopsis variegation mutants: new insights into chloroplast biogenesis. Journal of Experimental Botany, 57(9), 1871–1881. doi.org/10.1093/jxb/erj008
    8. Hagemann, R. (2010). The foundation of extranuclear inheritance: plastid and mitochondrial genetics. Molecular Genetics and Genomics, 283(3), 199–209. doi.org/10.1007/s00438-010-0521-z
    9. Lesnaw, J.A. & Ghabrial, S.A. (2000). Tulip breaking: past, present, and future. Plant Disease, 84(10), 1052–1060. doi.org/10.1094/PDIS.2000.84.10.1052
    10. Gould, K.S. (2004). Nature's Swiss army knife: the diverse protective roles of anthocyanins in leaves. Journal of Biomedicine and Biotechnology, 2004(5), 314–320. doi.org/10.1155/S1110724304406147
    11. Naskali, R.J. (1982). Sansevieria plant ('Vandal Gold'). US Plant Patent PP4,859. patents.google.com/patent/USPP4859

    Images in this article are AI-generated, not photographs of our plants.

    Back to blog
    1 of 4